The pipe feeder accurately feeds long and heavy pipes into the RA machine. This guarantees that the pipe is cut squarely.
Pipe Feeder - Base Unit
Suitable for all pipe cutting and beveling machines made by George Fischer (except RA 2, RA 2 H and RA 21 S). The RA machines can be directly mounted on to the base plate of the pipe feeder-base unit, without further parts. By means of a mechanic height adjuster, the RA machines con easily be set to the required cutting dimension. As the pipe feeder has a floating bearing, the RA machine will center itself on the pipe outer diameter.
Dimension of the base unit (length x height x width): approx. 73.00 inch x 41.400 inch x 19.600 inch
| Range: | Code | Weight (lbs.) | |
| Pipe outer diameter | 6.30 - 12.80 inch | ||
| Load | max. 800 lbs. | 790 068 051 | 145.530 |
Pipe Feeder - Optional Unit
For prolongation of the pipe feeder base unit, can be directly joined.
Dimension of optional unit (length x height x width): approx. 63 inch x 41.4 inch x 19.60 inch
| Range: | Code | Weight (lbs.) | |
| Pipe outer diameter | 6.30 - 12.80 inch | ||
| Load | max. 800 lbs. | 790 068 061 | 79.830 |
Floor Bracket Accessory (Code: 790 068 053, Weight: 79.380 lbs.)
To fasten the basic unit and the optional unit to the floor.
The assembly consists of:
- 4 brackets
- 8 bolts with washers
Digital Linear Measurement Unit (Code: 790 068 054)
For mounting on the basic unit of the Pipe Feeder. With the help of this device, pipes can be cut with 0.004 inch accuracy. Various measurement methods, such as incremental dimensions, can be programmed easily via sensor buttons. It is also possible to enter the respective thickness of the saw blades.